Handpiece (No.15D) - Hammer Action with Duplex Spring
FD15D- Handpiece has a reciprocating rather than rotary action and is used at low speed (0-5,000 rpm) by jewellers for stone setting and decorative work.It requires periodic lubrication.
- The hammer has a 1/32" stroke and its impact force can be adjusted from light to heavy by turning the silver knurled adjusting ring.
- It comes with an Anvil Point (10177) and pin for installing and tightening points.
- A Pavé point (R15PT) for special texturing and stylus with carbide tip (10212) for marking or scribing hardened steel are available separately.
- The duplex spring should never be used with a bend past 30 degrees, though it will bend further if allowed
- Dimensions:
£170.00
EACH
