K1080 (Hammer Action HP)

Foredom K1080 Hammer Action (up to 2,500spm) for Stone Setting & EngravingIdeal for stone setting applications, including channel setting and engraving techniques requiring a hammering action. The force of the impact of this reciprocating handpiece can be adjusted from light to full by turning the metal ring while the motor is off or running.The speed of the hammer action can also be varied from 0– 2,500 strokes per minute with the manual dial on the control box. Used with the Graver Holder, see below, the MH-011 Handpiece becomes a precision, power engraver– no need for an air compressor or a flexible shaft drive.Foredom K1080 Contains:

• Control Unit (HP4917)
• MH011 Hammer Handpiece
• Foot Pedal
• Accessories
• 110v/220v option switch
• 2 Year Warranty
• CE marked

Accessories:

• 3 Anvil Points with Threaded Shanks
• Adapter for Threaded Anvil Point
• Adapter for Non-Threaded Shank Accessories
• Graver Holder* (HPH8-214) with Allen Key
• 5mm Open End Wrench
• Accessories Tray
• Handpiece Cradle
• Spare Motor Brushes
• 2 Pins used to tighten Anvil Points
• 1 Anvil Point Holder used for shaping the point