Jump Ring Maker, Durston Quad
R60140
How to use: 1. Place the preferred mandrel size into the chuck and tighten, locking the mandrel in place ready to make your coil of wire. 2. Keeping the wire pulled tight, use the handle to rotate the mandrel creating a tight coil of wire around your mandrel. 3. Remove the coil from the mandrel and place in the coil holder, twisting the nuts to press the sprung loaded top down, holding your now coiled wire firmly in place. 4. Insert your number 30 hand piece into the protective collar. Then attach the circular saw blade using the cutter holder attachment provided. 5. Lubricate the saw blade using our burr cut lube (B4181) 6. Cut along the slit, cutting your coil into your simple and easy to make jump rings
£175.00
EACH
Quantity Discounts
| £175.00 when you buy 1 |
| £169.95 when you buy 2 or more |
