Paper (Wet & Dry) SIA

SIA - Wet and Dry Polishing PaperThe first choice for first-class wet or dry sanding results As a leading wet use abrasive, the 1913 Sia aluminium oxide series has been producing outstanding results for years thanks to such outstanding properties as high stock removal rates, optimal water resistance, long life and flexibility.

• Sia Switzerland
• Size 230 x 280mm (A4 size)
• Very even sanding pattern
• Highly water resistant
• Highly adaptable to contours and shapes
• High performance for stock removal with good finish
• Can be used wet or dry
• C weight paper for longer lasting use
• Aluminium oxide particles
• Grits: 60, 80, 100, 120, 150, 240, 320, 500, 1200, 2000
• Single sheets or packs of 50
• Sia 1913 paper

Grits: The lower the grit number, the larger the particle size thus the paper will be coarser. Accordingly the higher the grit number, the smaller the particle thus making the paper smoother.Using wet and dry paper wet will prolong the life of your material by up to 10x! Using it wet also gives a better finish. Be sure you wipe it with a bit of methylated sprits to remove any residue when you are finished.To use a wet and dry sand paper, dip the paper inside a bowl of water and wet the paper thoroughly, and then sand the material with it, using long and steady strokes. Do not allow the paper to dry while you are sanding over the finish. If you are using a dry paper, wrap your dry paper onto a dry piece of (buff stick) wood and sand along the grains. Stop to wipe or brush away the sanding dust after making numerous strokes. Continue sanding until the piece of material you are sanding has a smooth and even finish.Areas of application: Metal, Wood–Parquet, Plastics, Glass, Stone, China-Ceramics, Leather-Rubber