Flux - Paste, Easy-Flo
Flux - Easy-Flo - Flux Paste Easy-flo™ Flux Paste a brazing flux suitable for use with precious metal brazing. It has a working range of 575-825ºC .Easy-flo™ Flux Paste exhibits better life at temperature and greater overheat resistance than many other flux pastes. Easy-flo™ Flux paste has a low melt viscosity and as such performs well when pasted onto vertical surfaces, and can be useful when brazing stainless steel. The molten viscosity of Easy-flo™ Flux Paste is such that it holds on vertical surfaces. It is therefore particularly useful when brazing joints in positions where other fluxes may have a tendency to run away from the joint. Product uses: This product is suitable for use on all the common materials, gold, silver, copper, brass, mild steel and stainless steel), but not aluminium. Conditions for use: Flux paste should be brushed onto the joint surfaces before assembly. Further flux should then be applied externally either side of the joint mouth. It is good practice to mechanically clean and degrease the joint surface before applying flux. Heat slowly and evenly to the brazing temperature, without local overheating. Use the flux as a temperature guide - it will become opaque and may have some dark patches as brazing temperature is approached. If blackening of the flux occurs this is often a sign of insufficient flux, overheating or flux exhaustion. Supplied: 500g Tub
