8 Diameters, Ø4.5 to Ø16mm, UKD4225
- 8 Punch disc cutter, on square base
- Material is put between the two halves of the die, the corresponding punch is knocked down to cut the circle from the material. Mallet/hammer is used to knock punches.
- Punch sizes: Ø4.50, 6.30, 7.90, 9.50, 11.00, 12.50, 14.00 & 15.80mm
- Maximum sheet thickness 3mm
Made in UK
Size: 65 x 65 x 45mm