Quick-Sil Soft & Flexible, Castaldo
Castaldo Quick-Sil Soft & Flexible Castaldo® QuickSil® Soft and Flexible is the easy way to make moulds and cast a wide variety of objects. Because of its heat resistance low-temperature metals such as pewter and other low melting fusible alloys can be poured directly into the rubber moulds. Specifications:
- Castaldo Quick-Sil Soft & Flexible
- 100g or 1Kg
- Perfectly suited for impression moulding due to flexibility and lower hardness
- Strong, long lasting silicone rubber moulds
- They can produce dozens or hundreds of injections, depending on the complexity of the design
- They do not deteriorate or become soft over time but instead last for decades
- Perfect for production moulds or the last minute, one off emergencies
- It is a two-part room temperature vulcanizing silicone rubber putty that is easily mixed by hand
- Moulds cure ready-to-use with 0% rubber shrinkage in only 15 minutes at room temperature
- Also ideal for use with metal clay, either to make a mould of an existing object and the reproduce it, or to mould an original creation made in metal clay for further reproduction
- No careful measuring
- No messy liquids
- No vacuuming
- No 12 to 24 hour wait for finished moulds
- No vulcaniser required
- No release sprays needed, it is self lubricating
- See PDF's above for fact sheet and technical information
- Shore A Hardness: 27
- Mix ratio: 1:1
- Vulcanizes at: 21°C
- Rubber shrinkage: 0.0%
- Elongation before break: 550%
- 100g or 1kg
