Einhell Electric Drill
This single impact hand drill is exceptional value for money not to mention perfect to use with a flexible drive shaft (Code S33155).
Because of its variable speed control it is perfect to twist wire to make bangles, necklaces, earrings, etc. One simple technique to form this jewellery style is to lock the wires into the keyless chuck and the other hold in a bench vice or a hand vice. If you are using a hand vice get a colleague to hold the other end, set the electronic speed controller to number one, press the control button and the wire will twist. The longer the wire is twisted, the more they intertwine, so continue until the appropriate design has been achieved.
To add other forms to the wire roll them through a rolling mill, planishing press or hammer them with a planishing hammer this will add even more elements to the design of the piece.
Create some fantastic designs with wire twisting, using an array of metals including gold, silver, copper, brass, etc.
- Keyless chuck holding 1.6mm (1/16) to 12.7mm (1/2")
- Electronic Speed Control from with six settings
- Reverse Facility
- Additional Handle with Depth Gauge
- Casing has a special soft grip finish
- Power 650w
- Speed 2600rpm
- Drilling Depth (Wood) 25mm
- Drilling Depth (Metal) 10mm
- Drilling Depth (Concrete) 13mm
- 3 pin UK plug
- 230 volt