Bangle & Bracelet Tools

Made in Italy

Like our Wedding Ring Enlarging Tool (R5193/R31945) this tool comprises an essential part of both retail and manufacturing environments, allowing the user to stretch a bangle up to one size. Pre-made bangles can be stretched quickly and easily without any technical knowledge and while the customer waits. This tool is often used to alter a bangle prior to sale to an individual customer and further as a walk in service.

This unit comes complete with a set of six round dies. Additionally oval dies (B5195) are available to buy separately which are just as popular. Do remember the human wrist is oval in shape hence the ergonomic benefits of this set.

How to use and some handy tips when stretching…

The square base bottom has four holes giving you the option to bolt the Bangle Stretcher to the work surface (bolts not supplied, the diameter hole is 7mm). Naturally the dies are interchange for various sized bangles. When changing dies lower the handle completely or the die will not unscrew. When stretching a bangle ensure it sits in the middle of the die. When pushing the handle upwards to stretch, a small bar will protrude from the die known as the taper bar. This pushes out from the middle of the die which stretches the bangle evenly in six ways. Manoeuvre the handle back and forth approximately three or four times to stretch the bangle.

Please note:
Gemstones set in bangles may loosen and fall out whilst stretching. Just like ring resizing, be mindful to limit stretching, the solder join is the weakest point of the bangle and can fracture with excessive stretching. Spray WD40 (C32757) to keep the stretcher lubricated. Use and store in a dry environment.

• Strong robust cast iron body construction can last a life time with the correct maintenance;
• Save time and money by not remaking or reordering;
• Easily interchangeable set of six round dies, with wooden stand;
• Each die has six segments giving an even stretch.

Size:
Bangle stretcher - 360mm x 130mm x 180mm
Round die formers on stand – 100mm x 150mm x 250mm

Sizes of enlargers: Top Ø x Bottom Ø
45mm x 40mm
50mm x 45mm
55mm x 50mm
60mm x 55mm
65mm x 60mm
70mm x 65mm

Weight: 14kg