Click on the headings below to show/hide available product information and display available product stock items:
Mini Table Top Suction Vice
• Vice enables complete flexibility for filing, sawing, soldering, polishing painting models, engraving drilling and grinding.
• Small compact fine component holding vice
• No screws move around any ware needed
• The lever-operated suction cup holds tightly and instantly
• Best used on non-porous smooth surfaces such as glass, metal and laminated surfaces such as Formica.
• Aluminium jaws fitted for sturdy item holding
• Made from light weight plastic with metal components
Size and weight:
• 85mm x 70mm x 70mm
• Jaw size 38mm (1½")
• Max opening: 30mm
• 135grms
View Full Description
Table vice with clamp
• The clamp on vice feature permits the user to move the vice to different areas of the workshop.
• Rigid cast iron construction.
• Enamelled, hand painted finish.
Made in India
Size and weight:
• 120mm x 40mm 120mm
• Jaw size 38mm
• Maximum opening 30mm
• Clamp fitting table maximum 35mm
• Weight 650g
View Full Description
Cousins Material House Baby Table Vice
• Secure on your work surface with screws bottom cast base has 2 holes
• Sturdy cast iron construction.
• Enamelled hand painted finish.
Made in India
Size and weight:
• 120 x 55mm x 55mm
• Jaw size 40mm
• Maximum opening 30mm
• Weight 610g
View Full Description
Good quality vice with tempered and hardened jaws that will hold products firmly in place for all kinds of drilling work.
V grooves ensure that tools are held firmly in place.
Sizes & Weights:
• Jaw Width: 38mm
• Jaw Depth: 20mm
• Maimum Opening: 38mm
• Vice Length: 100mm
• Vice Depth: 40mm
• Weight 500g
View Full Description
Watchmakers Bench Vices.
Precision made small vice featuring a robust bench fixable sole plate and slide clamp release facility for removal of vice head (complete with job) for easy access, further work and close inspection etc.
Substantially rigid all steel manufacture with absolutely parallel 45mm wide jaws moving on a
machined dovetail slide and opening to a maximum of 35mm.
A perfect partner for jewellers, watchmakers and precision engineers.
Indiscernible in quality and finish from the Bergeon equivalent costing over twice the price.
View Full Description
Table vice rotating with clamp
• Rotates a full 360 degrees to a workable position and then should be locked with the lever.
• The clamp on vice feature permits the user to move the vice to different areas of the workshop.
• Rigid cast iron construction.
• Enamelled, hand painted finish.
Made in India
Size and weight:
• 140mm x 60mm 130mm
• Jaw size 50mm
• Maximum opening 40mm
• Clamp fitting table maximum 35mm
• Weight 1.1kg
View Full Description
Bench Top Swivel Vice
The ball socket manufacture of this multipurpose vice enables complete flexibility for filing, sawing, soldering, polishing, painting models, engraving drilling and grinding.
The unit tilts at angles from 0-90° and rotates a full 360°.
• The mounting clamp opens as wide as 2" which will mount on the majority of workbenches, while the rubber pad protects the bench's surface from marking.
• The ball sits firmly in the socket whilst allowing the user freedom to reposition work as frequently as required.
• The jaws are covered with detachable, protective inserts to avoid damaging the held pieces.
• The jaw width is 3" (76mm) but opens to 2".
• The jaws have grooves specifically ground in to hold tube and sheet.
• Made of heavy cast aluminium with an enamel-coated body and cold rolled steel screws.
Size and weight:
• 300mm x 135mm x 75mm
• Weight: 1kg
View Full Description
A compact heavy duty workshop vice suitable for use by both the amateur and professional craftsman.
The body and slide have been ground to exacting standards and feature a machined anvil and replaceable steel jaw plates. High grade ACME thread main screw with the capacity to clamp over one ton between the jaws.
A safety stop prevents the slide from being accidentally separated from the body.
• Jaw width: 4" (100mm)
• Jaw Depth: 60mm
• Opening: 4" (100mm)
• Weight 8kg
View Full Description
Mini 2 pieces Universal Function Workshop Clamps
Hold/secure your finer workshop pieces with these solid steel construction mini clamps
• Fine cut acme thread for smooth and fast movement
• Ø22mm swivel disc plate to correct the angle applying even pressure
• A favourite with miniature model makers, jewellery, crafts, clock restorers
• Also available various sized G clamps see item codes C33515 to C33518
Features:
• Will hold items thickness 0 to 40mm
• Weight: 120 grams for the pair
View Full Description
Faithful G-Clamps - General Purpose Workshop Clamps
A G-Clamp is used by means of turning the screw through the bottom of the frame until the desired state of pressure or release is reached.
In the case that the clamp is being tightened, this is when the objects being secured are satisfactorily secured between the flat end of the screw and the flat end of the frame.
If the clamp is being loosened, this is when a sufficient amount of force is released to allow the secured objects to be moved.
• Ribbed ‘I’ section ductile iron construction.
• Deep cut Acme threads for smooth and fast movement.
• Broad swivel shoe adjust to the correct angle to apply even pressure.
• Powder coated to protect from corrosion.
• Clamp C33518 is Ideal to use with Ring Stretcher R4920, will stench rings with accuracy in an automated action.
• A student/hobbyists favourite to clamp onto bench pegs (B4228).
Weights:
• C33515 - 550g
• C33516 - 500g
• C33517 - 854g
• C33518 - 1.1kg
View Full Description
Associated Products (Click to View)
Hand Held Vice for gripping small components e.g. pins, wire, rods etc.
• 12.5mm Jaw Width
• Smooth Jaw
• Length 150mm
• Hole through the centre of the handle to accept long pins and wire
• Maximum Jaw Opening 5mm
• Wooden Handle
• Weight 90gms
View Full Description
• Bergeon Swiss 1799.5
• 15mm Jaw
• Length 115mm
• Hand held vice for gripping e.g. Pins wires rods etc
• Serrated jaws
• Maximum jaw opening 4mm
• Metal construction knurled handle
• Weight 60 grams
View Full Description
Hand vice for holding, bending and twisting your workshop materials
• Handle adjustment rotation jaw open and close action
• For the jeweller, silversmith, arts craft, contemporary jeweller, model makers and light engineers
• Compatible wooden handle
• Quality steel vice jaws and body
150 grams
View Full Description
• 3 inch
• 25mm wide serrated spring loaded jaws
• Opening to max 15mm capacity
• Length 8cm
• Weight 180g
View Full Description
• 6½ inch
• Length 16.5cm
• Weight 230g
25mm wide smooth spring loaded jaws and central “V” groove,
opening to 15mm max capacity and featuring a sealed wooded handle for comfortable grip.
View Full Description
• 4 inch
• 35mm wide serrated spring loaded jaws
• Opening to max 20mm capacity
• Length 10cm
• Weight 260g
View Full Description
Popular vices for engraving, model making, sculpture making are just some examples of this vice:
• The adjustable ball swivel enables versatile use, allowing repositioning of work as frequently as required, etc.
• Four holding pins are included slot into any of the sixty position holes allowing any different shaped items to be used on this tool.
• Open/close the vice jaws for different sized objects using the easy hand operated turning knob.
• Complete metal construction.
View Full Description
Cousins Material House Pearl Drilling Vice
When drilling pearls to make jewellery holding the item can be problematic to drill such as slipping.
• Firmly secure pearls for easy drilling.
• Cup shaped nylon jaws, which will not mark the item with a superb fit.
• Other shapes like round and oval items can also be drilling using this vice.
• Its body and hand closing jaw knob are both made from steel.
Size & Weight
• 80mm x 50mm x 20mm
• Largest pearl/object that can be held is 15mm in diameter.
• Made in India
• Weight 105gms
View Full Description
Drilling pearls/beads can be a fiddly process because they are hard to hold in your hand and also warm up with the cutting friction of the drill.
This handy little tool solves this problem by simply clamping the pearl/bead holding it firm and securer while drilling.
• Spring loaded ridged locknuts buts provide quick clamping and releasing action
• With thirteen round clamping holes, sizes: 6.3, 6, 5, 4.4, 4, 3.5, 3, 2.5, 2, 1.3mm
• Hold up to Ø8mm
• Made in steel chrome plated
Size: 40 x 30mm
Weight: 35 grams
View Full Description
This clamp is extremely useful for holding work together when drilling, tapping and other machining operations.
Manufactured from case hardened steel for strength and equipped with a spring clip and a retaining ring which holds the loose jaw in place when the clamp is being adjusted.
Size 30mm (1¼” inch) capacity
Weight: 120g
View Full Description
Associated Products (Click to View)
|
Updating page content...